Alloet AD9833 DDS Signal Generator Module Programmable Square Triangle Sine Wave

AD9833 DDS Signal Generator Module Programmable Microprocessors Serial Interface 0-12.5MHz Square Triangle Sine WaveDescriptions:1. AD9833 is a programmable waveform generator capable of generating a frequency 0-12.5MHZ sine, triangle, square wave signal. 2. Waveform generator is widely used in a variety of measurement, excitation and time domain response field, output frequency and phase are programmable via software, easy to adjust.3. Clocked clock is 25MHz, precision 0.1Hz, clock frequency is 1MHz, the precision.You can reach 0.004Hz. Via three serial interfaces to write data.Features:1. Onboard 25MHZ (accuracy of 50ppm) active crystal, stepping accuracy 0.1HZ.2. On-board high-speed amplifiers 300M and also has a low-pass filtering.3. Two-channel output signal, an original signal output, an amplified output signal 5 times, 50Ohm output impedance.4. Support universal plate (tunnel plate), a multiple-board pins are 2.54mm, can be easily welded universal board.5. Distribution STM32, STM8, STC and other common microcontroller debugged program and relevant information.Application:1. Frequency excitation / waveform generation. 2. Liquid, gas flow measurement.3. Sensing applications - approximation, sports, defect detection.4. Linear loss, linear decay.5. Test equipment, medical equipment.6. Scan clock generator.Specification:Working voltage: 2.3V-5.5V.Working temperature range: -40 ~ +105 ℃ prefix =oSize: 32mm x 32mm/1.25x1.25''Note: Please allow slight size differs due to manual measurement.Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.Package included:1 x AD9833 DDS Signal Generator Module

Browse Our Catalog.

View More In Traffic Message Channel (TMC) Receiver Modules.