Product Description & Reviews
2pcs Nano V3.0,ATmega328P Microcontroller Board,Nano Board CH340G Chip 5V 16MHz with 2pcs 245mm USB Cable, Compatible with Arduino Nano V3.0 for ArduinoNote: Before running the procedure, pls install the corresponding computer system driver.Drivers: directly from the chip manufacturer:WCH 340 product home page: http://www.wch.cn/product/CH340.htmlhttp://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver)http://www.wch.cn/download/CH341SER_MAC_ZIP.htmlhttp://www.wch-ic.com/download/list.asp?id=127 (windows)http://bit.ly/2pMF4inFeatures:The pins has been welded, you don't need to solder it by yourself.Fully Compatible to Arduino Nano V3.0 ATmega328P-AUATmega328 MicrocontrollerBootloader installed, ready to upload sketches from Arduino softwareMicrocontroller ATmega328P-AUOperating Voltage: 5VInput Voltage: (recommended) 7V-12VInput Voltage: (limits) 6V-20VDigital I/O Pins: 14 (of which 6 provide PWM output)Analog Input Pins: 8DC Current per I/O Pin: 40 mADC Current for 3.3V Pin: 50 mAFlash Memory 32 KB (ATmega328) of which 2 KB used by bootloaderSRAM: 2 KBEEPROM: 1 KBClock Speed: 16 MHzDimention: Approx. 45x17x19mmCable Length: 245mmColor: Blue(as the picture shows)Package Including:2 * Nano V3.0 ATmega328P Arduino Compatible Board2 * Mini USB Cable
Features & Highlights
- ★Matters Need Attention: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html; http://www.wch-ic.com/download/list.asp?id=127 (windows); http://bit.ly/2pMF4in.
- ★If you need an older driver, pls get it from GitHub-please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
- ★Specification: The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- ★Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
- ★Small Arduino UNO Board: It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper; More Breadboard Space: Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
Additional Information
Manufacturer: | Makerfire |
Brand: | Makerfire |
Color: | 2pcs boards+2pcs cables |
Part Number: | 43VGHX27KC18J3N |
Publisher: | Makerfire |
Studio: | Makerfire |
MPN: | 43VGHX27KC18J3N |
UPC: | 192684491868 |
EAN: | 0192684491868 |
Item Weight: | 0.01 pounds |
Item Size: | 1.18 x 1.18 x 1.18 inches |
Package Weight: | 0.12 pounds |
Package Size: | 4.92 x 0.79 x 0.79 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
By ElectronicNuts AC Phase Dimmer 8 Channel Manufactured Quality
mpn: EN8ChACDimmer, ean: 0687299660674,