nidici BN-280 GPS Module U-blox U8 UART TTL Level Dual Glonass GPS with Flash for Arduino Pixhawk Aircraft Flight Control FPV Freestyle Drone Quadcopter

nidici BN-280 GPS Module U-blox U8 UART TTL Level Dual Glonass GPS with Flash for Arduino Pixhawk Aircraft Flight Control FPV Freestyle Drone Quadcopter by nidici at Sophies Class. Hurry! Limited time offer. Offer valid only while supplies last. Specification: Physical parameters Dimension :28mm*28mm*10mm Weight : 11.8g Connector : 1.25 spacing 6pin Chip Characteristics Chip ï¼šu-blox U8 Receiver modeï¼šGPS,GLONASS,Galileo,BeiDou,QZSS and SBAS Frequencyï¼šGPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1 72 search channel Sensitivity Tracking : -167dBm Recapture : -160dBm Cold start : -148dBm Hot start : -156dBm Accuracy Horizontal accuracyï¼š2.0mCEP 2D RMS SBAS Assistance(open sky) Speed accuracy :0.1m/s 95%ï¼ˆSA offï¼‰ Time accuracy

Product Description & Reviews

Specification: Physical parameters Dimension :28mm*28mm*10mm Weight : 11.8g Connector : 1.25 spacing 6pin Chip Characteristics Chip ：u-blox U8 Receiver mode：GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS Frequency：GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1 72 search channel Sensitivity Tracking : -167dBm Recapture : -160dBm Cold start : -148dBm Hot start : -156dBm Accuracy Horizontal accuracy：2.0mCEP 2D RMS SBAS Assistance(open sky) Speed accuracy :0.1m/s 95%（SA off） Time accuracy ：1us Start Time Cold Start : 26s Warm start : 25s Hot start : 1s Output Data Baud rate : 4800bps to 921600bps,Default 9600bps Output Level : TTL or RS-232,Default TTL level Output agreement : NMEA-0183 or UBX, Default NMEA-0183 Single GNSS : 1Hz-18Hz Standard GNSS : 1Hz-10Hz,Default 1Hz Working Limitation Height : 50,000m Max Speed: 515m/s Max Gravitational acceleration ：4g max Power consumption VCC : DC Voltage 3.0V-5.5V,Typical: 5.0V Current : Capture 70mA/5.0V Operating temp :　-40 °C ~ +85°C Storage Temp : -40°C ~ +105°C Indicator TX LED: The data output, TX LED flashing PPS LED: PPS LED not bright when GPS not fixed,flashing when fixed Module Pin description 1. PPS,Sec pulse will output after positioning, pulse period is 1s, high level persists 100 ms, used for system synchronization 2. GND ,connect to the ground 3. TX data output of module 4. RX data input of module 5. VCC, 3.0V-5.5V,recommend 5.0V 6. BOOT Package Includes: 1 X BN-280 GPS module 1 X Cable

Features & Highlights

This BN-280 GPS Module can show your speed.
With u-M8030-KT chip, 72 searching channel support rate and 4800bps to 921600bps baud rate.
It has several receiver mode,such as GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS.
Output Level is TTL or RS-232, TTL by default. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
The TX LED flash means GPS module output normally.The PPS LED flash means gps module locate your place.

Additional Information

Manufacturer:	nidici
Brand:	nidici
Publisher:	nidici
Studio:	nidici
UPC:	680465696279
EAN:	0680465696279
Item Weight:	0.03 pounds
Package Weight:	0.03 pounds
Package Size:	3.15 x 0.39 x 0.39 inches

Browse Our Catalog.

View More In GPS Trackers.

Have questions about this item, or would like to inquire about a custom or bulk order?

If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.