Product Description & Reviews
product name:HDD Enclosure Interface:M.2 NVME/USB 3.1 Color:grey weight:137g Material:aluminum size:L 105 x W 45 x H 14 mm Installation Diagram: 1. Prepare the accessories before installation: Hardware aluminum housing (Figure: chassis with silicone gasket), bottom shell PCB board, NVMe SSD hard disk (face paste good silica gel sheet), screwdriver, bottom shell screws. 2. Insert the prepared SSD hard disk (must be PCIE) according to the direction regulation on the PCB board. 3. Buckle the golden copper pillars at the end of the SSD hard disk, and gently press the hard disk until the copper pillar chassis and the corresponding PCB copper holes coincide with each other. 4. Press the copper post and turn it over the back of the PCB board to lock the set screw. 5. Put the PCB board with SSD hard disk reversal into the case. Note: The Type-C connector must be installed in place. 6. After the PCB board is in place, fix the board with two screws on the locking plate. 7. The direction of the bottom shell cover (for the sake of beauty, the bottom of the product we use a lock design, just insert the bottom cover fastened, don't need screw to lock). 8. Press the bottom shell to be flat and lock the two screws at the front.
Features & Highlights
- USB 3.1 Type-C to M key M.2 SSD enclosure for Intel 600P NGFF PCI express NVMe
- Support Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type. The PCI-E Interface Implements The NVMe Protocol Standard
- Seamless Cloning and File Transfers with the Samsung Magician Software, the Ideal Ssd Management Solution For Performance Optimization and Data Security with Automatic Firmware Updates
- The NVMe interface (PCIe M.2 2280) offers enhanced bandwidth, low latency, and power efficiency, perfect for tech enthusiasts, high-end gamers, and 4K & 3D content designers
- NOTE:Only for M-Key M.2 SSD (PCI-E NVMe-based), doesn't support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCI-E AHCI-based), applicable to size 2230 / 2242 / 2260 / 2280.
Additional Information
Manufacturer: | ACASIS |
Brand: | Acasis |
Publisher: | ACASIS |
Studio: | ACASIS |
EAN: | 6958945702074 |
Package Weight: | 0.52 pounds |
Package Size: | 4.29 x 1.34 x 1.34 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.